Equal Negative and Positive Pitch

[nbells]

Originally Posted by mmarmouz

I was finally able to get it close

50% stick is -0.3 pitch
0% stick is -12.1
100% stick is 11.9 pitch

Is that ok ?

Unless you can tell the difference of 0.1 degree... then that will do nicely !

nbells

[mmarmouz]

Originally Posted by nbells

Unless you can tell the difference of 0.1 degree... then that will do nicely !

nbells

What about the neutral, 0.3 difference, that will do fine ?

[nbells]

""What about the neutral, 0.3 difference, that will do fine ? ""

You must be using a digital gauge ?

Yeah, it will be fine, just means your stick will be half a ball hair higher than usual.

You have to understand that you will never get it absolutely spot on as all mechanical devices suffer from Hysteresis and as such repeatability has a high degree of uncertainty.

The mechanical devices being the Gimbals in the TX and the Rotor Head, Blade Grips etc etc

nbells

[mmarmouz]

Originally Posted by nbells

""What about the neutral, 0.3 difference, that will do fine ? ""

You must be using a digital gauge ?

Yeah, it will be fine, just means your stick will be half a ball hair higher than usual.

You have to understand that you will never get it absolutely spot on as all mechanical devices suffer from Hysteresis and as such repeatability has a high degree of uncertainty.

The mechanical devices being the Gimbals in the TX and the Rotor Head, Blade Grips etc etc

nbells

Yes it is the Align digital gauge, so i guess i will be fine thanks for all the help !

[cajkat1073]

If its only off by .3 I wouldn't worry about it. If you have 0 at mid stick you can move your collective (throttle) all the way up or down with your pitch gauge on go to swash menu lower your +60 on your pitch setting until you have 12 pitch. That is what adjust your total traveling her the number more the servos move. Lower the number less servo travel.

[sarmeneau]

forgot to ask if your setting it whit your throttle hold on. but if youve got it that close, go fly the crap out of it, it will be fine.

[VonRecktofen]

Originally Posted by nbells

""What about the neutral, 0.3 difference, that will do fine ? ""

You must be using a digital gauge ?

Yeah, it will be fine, just means your stick will be half a ball hair higher than usual.

nbells

That's a great one, really made me laugh out loud!!!

[mmarmouz]

Originally Posted by Charliedontsurf

That's a great one, really made me laugh out loud!!!

At least you had good time reading it !

Yes it fly great ! ...... In 3gx mode ! Not aps lol !!