Register Now

hotroad79 · 09-29-2014, 06:20 AM

I don't know what is happening? no idea at all. please help...

I am using helicommand hc3-sx with 2 sattelites. WR hercules for BEC. savox 2271 cyclic servos and kontronik 80+ ESC for my Logo 600SE. running 12s lipo. no RX batteries.
I made almost 20 flight with the same setup and also using bail out mode with no issues.
last week I only changed the bearings of scorpion motor. that was it, first flight after changing the bearings here is the conclusion. nothing changed at all.

h00ktern · 09-29-2014, 11:13 AM

I am by no means qualified to speak on this, but maybe check your servo plugs in the fbl. I tried plugging in a strobe set-up to Aux2, and had something similar occur, but definitely not as severe.

Hang tough; there are some very smart and experienced members here who will guide you appropriately.

Safe trips.

Sent from my EVO using Tapatalk

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-29-2014, 11:13 AM	#2 (permalink)
h00ktern Registered Users Join Date: Jul 2014	I am by no means qualified to speak on this, but maybe check your servo plugs in the fbl. I tried plugging in a strobe set-up to Aux2, and had something similar occur, but definitely not as severe. Hang tough; there are some very smart and experienced members here who will guide you appropriately. Safe trips. Sent from my EVO using Tapatalk

Register Now

Log-in