START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Futaba 14MZ - 12Z Futaba 14MZ and 12Z Help and features Support Forum |
|
LinkBack | Thread Tools | Display Modes |
04-14-2005, 10:25 PM | #1 (permalink) |
Registered Users
Join Date: Apr 2004
|
POST your 14MZ & 12Z Setups, Pictures, and Sound Files H
This is the place to post your 14MZ, FX-40 & 12Z files. Please share them, as we all can learn from one another.
|
Sponsored Links | |||
Advertisement |
|
04-14-2005, 10:31 PM | #2 (permalink) |
Registered Users
Thread Starter
Join Date: Apr 2004
|
This is a basic ECCPM Model setup. The reversing and servo layout is set for Miniature Aircraft Helicopters.
This setup uses a GV-1 governor set to "off" in normal, and 1750 in idle up 1&2. Also it is set up for the GY601 gyro in AVCS mode at 38%. Switch E is condition (Idle, 1, 2) switch F is governor off override, switch G is throttle hold, Switch H is throttle cut when the throttle stick is at idle. The setup is very simple and a good base point to work off of. |
04-18-2005, 02:41 PM | #3 (permalink) |
Registered Users
|
Thanks Eric
I just got my 14MZ today. I have a Spectra with 601 and GV1 I'll let ya know how close it is on the spectra and if I need to make any changes I'll post them. Also have you noticed that the throtlr stick doesnt appear to go full travel ?? Mine doesnt go all the way to the last white index mark.
__________________
Craig Alias Racer38 Align 500L Dominator Graupner MZ-18 |
04-18-2005, 11:23 PM | #4 (permalink) |
Registered Users
Thread Starter
Join Date: Apr 2004
|
The throttle stick travel is reduced in both the 14MZ as was the 9Z. You notice it because the lines do not line up, but they are the same travel. It took me a while to get use to it as the 9C has full travel. Don't ask me why they did that, it is just the way it is. If you want full travel, you need to send it to Hobbico and have them remove the limiters and recalibrate it. I still may do that, I just do not have the time now. I really can not say if I like it reduced or not, it is just different.
Ya let me know if there is anything messed up in there! I think that setup is pretty decent, but for some reason we loaded up one and the gov was reversed, but worked in my radio fine... not sure what happened there. Good luck and let me know how it is going! |
04-19-2005, 02:29 PM | #5 (permalink) |
Registered Users
Join Date: Jul 2004
|
Program for DYNA - X with YS 91 and 1:8 gearing
GY601 @ 38 % on sw F on and off @ normal 50% TJ PRO : off @ normal curve expo on 1760 @ idle 1 V-curve on 1850 @ idle 2 V-curve together on idle sw C Trottle hold @ sw G Trottle cut @ sw H Expo aileron -30% D/R 80 % elevator -30% D/R 80 % ruder -20% D/R 100% Channels: 1 aileron 2 elevator 3 Trotle 4 ruder 5 gyro 6 governor 7 pitch Best regargs Sapca |
04-21-2005, 05:56 PM | #6 (permalink) |
Registered Users
|
Here is my Spectra G Picture, This Radio is soooo Cooool
__________________
Craig Alias Racer38 Align 500L Dominator Graupner MZ-18 |
04-28-2005, 07:46 PM | #7 (permalink) |
Registered Users
Join Date: Apr 2005
|
Is anybody out there with a raptor setup?
Manuel :?: |
04-28-2005, 08:12 PM | #8 (permalink) |
Registered Users
Thread Starter
Join Date: Apr 2004
|
I could easily mod my setup just a bit and get it right for standard mix. The rest of the setup will be the same. I will see about doing that tonight or tomorrow.
later, |
05-10-2005, 07:55 PM | #9 (permalink) | |
Registered Users
Join Date: Apr 2005
|
Quote:
Later; D.W. |
|
05-19-2005, 01:03 PM | #10 (permalink) |
Registered Users
Join Date: Apr 2004
|
Eric,
By chance do you have your Ion-X model that we could download I know it is very close to the same as the fury one you done but the Throttle curves and we don't need the Gov part David |
05-19-2005, 02:12 PM | #11 (permalink) |
Registered Users
Thread Starter
Join Date: Apr 2004
|
Sure, when I am home later I will post it up.
|
05-30-2005, 03:54 PM | #13 (permalink) |
Registered Users
Join Date: Apr 2005
|
Thanks
D_Wheel,
Thanks a lot. Does anybody have sound bits files? Manuel |
09-24-2005, 05:55 AM | #14 (permalink) |
Registered Users
Join Date: Aug 2005
|
T14 Sounds
Hi,
hope someone finds them helpful incl. any kind of flight mode, Gov On / OFF, Idle Cut, Idle Low, Hold, Autorot Idle / Autorot Cut etc...
__________________
Thx, Yours Henning Piez |
01-02-2006, 08:44 AM | #15 (permalink) |
Registered User
|
Here are my contributions so far.
Reflex Sport 90 Setup Ion-X Single Stage Actro 32-3 77-O-H Ion-X Dual Stage NEU 1521 77-O-H TREX CCPM NEU 1107 Jazz ESC Lark 3D Plank 4 mode pretty cool Plus a few of Shannon's Models... You guys have nay models you want to share? Lets build up some starting points for people getting the KILLER 14MZ! Thanks in advance for sharing!!
__________________
William James Crazy wife still trying to kill me. |
01-05-2006, 10:07 AM | #16 (permalink) |
Registered Users
Join Date: Apr 2004
|
These are my files for the 3D MP, Avant EFX and Hirobo Mini Lama.
Please note that all of them are in mode 1. - The Avant is setup for the Gy611 and TJ Rev Max so idle up 1&2 have a straight 100% throttle curve. - the 3D MP is setup for the CSM 720. Both of them are setup for 0° at center stick and have a linear pitch curve. The difference beethween idl up 1&2 is that in idle 2 you have a slower tail. bye Iacopo
__________________
Synergy N9 |
01-11-2006, 08:10 PM | #18 (permalink) |
Join Date: Jan 2006
|
hello everybody
does anyone has a setup program ( file mdl) for 14mz, program to work with a vario bell222/230 or airwolf... thanks |
Thread Tools | |
Display Modes | |
|
|