START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
500 Class Electric Helicopters 500 Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar. |
|
LinkBack | Thread Tools | Display Modes |
06-07-2014, 09:11 PM | #1 (permalink) |
Registered Users
Join Date: Apr 2014
|
simulator fly fode 0 or 1
well just wondering I'm still new to this and was just on the simulator playing around should I be flying in mode 0 or 1 ? I can fly without my training wheels anymore and was thinking should I practice in 3d mode or still fly in the throttle using mode? any input would be great how people started out and what worked for them...thanks...
|
Sponsored Links | |||
Advertisement |
|
06-07-2014, 09:51 PM | #2 (permalink) |
Registered Users
Join Date: Jul 2011
|
You can fly in either. Depends what stage of flying your at. If your practising 3d stuff then you would need to be in Stunt mod or 1 as u call it. Otherwise if your just practising circuits and starting out, Normal mode will be fine or 0.
What sim are you using? Also you can set your Pitch and Throttle curves in your Tx for which mode you are flying for in the sim as well. Hope this helps. Gav
__________________
Assualt 700 Align DomL 500 Align 470lp Dx9 Fly like there's no limits ! |
06-08-2014, 06:05 PM | #3 (permalink) |
Registered Users
Join Date: Nov 2012
Location: Maryland
|
I would fly in idle up, especially if you're starting to do flips/rolls. You'll need to fly that way eventually anyway, and so why not train yourself to do it right? Especially since you don't have to worry about accidently slamming your heli into the ground! Flying in normal mode will only train you in bad habits.
__________________
<> Trex 600 ESP FBL, Trex 500 ESP FBL, Gaui X3, Oxy 3 <> <> Builds in progress: Logo 600SX, Synergy 516 <> *Spartan Vortex VX1e*
|
Thread Tools | |
Display Modes | |
|
|