CX-3X200 Satellite

[Fragginlucky]

I cannot find any info on the web, nor the forums, about how to setup the CX-3X2000 using a satellite receiver. Does anyone have experience using this controller with a satellite receiver?

[Daddy]

I don't know but have you tried the same setup as the 3x1000?

[Fragginlucky]

No I haven't tried the 1000 setup. After reading all the issues with the CX-3X2000 I decided to use the Skookum 540 I had sat aside for another project.

[cillyjr]

Hi,
I wrote to kymodel, but nothing.
I tried many times with no success!

Probably I will take-off my hk500tt the first time with AR6200+DSMX satellite...(with too many wires)

I made this procedure:
1) Pre-bind the satellite to the Tx not using the 3x2000, but using a normal receiver;
2) Fire up the 3x2000 (still connected to full receiver), fire up the USB software, do the "connect";
3) Go into setup, set receiver type to dsmx-2 (dx8 22ms);
4) Exit the USB software, power down the 3x2000;
5) Unplug the full receiver, plug in the dsmX satellite, power up...

The problem is that after start up (A/B LED flash alternatively) the Red Led start flashing (Error occur during initialization, restart gyro). Reconfiguring full receiver system all work fine.
Now I've updated the v2.2, but nothing change. The red led start blinking after initialization. I am using a DX8 and a AR6210 receiver (with dsmx satellite).

I only notice that if I start up gyro without tx "on", the gyro will block A&B led steady, then I press set up button on the gyro and it go in initialization, then red led steady. After that, I power on the radio and something work (only cyclic servos, no rudder, no gyro gain).

Here an image of setup program:

[cillyjr]

I'm sorry, but does not seem to work with Spektrum satellites.
I also tried to write Ky-Model, but I have not received any useful information.
I bought the gyro specifically for use spektrum satellite...

Failed test of the CopterX CX-SAT-SP Spektrum satellite for 3x2000 gyro (6 min 8 sec)

[cillyjr]

Originally Posted by cillyjr

I'm sorry, but does not seem to work with Spektrum satellites.
I also tried to write Ky-Model, but I have not received any useful information.
I bought the gyro specifically for use spektrum satellite...

http://www.youtube.com/watch?v=LZlqWMZiTL4

Originally Posted by cillyjr

Hi,
I wrote to kymodel, but nothing.
I tried many times with no success!
...
I made this procedure:
1) Pre-bind the satellite to the Tx not using the 3x2000, but using a normal receiver;
...
Now I've updated the v2.2, but nothing change. The red led start blinking after initialization. I am using a DX8 and a AR6210 receiver (with dsmx satellite).
...

I am using a DX8 and a AR6210 receiver (with dsmx satellite). ...and that was the problem... i've tryed with AR8000 and all seems to work (although it has not yet flown)...

[gravythe clown]

cillyjr have you got yours to fly? Also why for the diffrence with using 6ch receiver verses 8?

I'm trying to set this up on a Blade SR I'm converting and am having difficulties finding answers on setting this up for spektrum satellite control.

I'm using DX9 and DSM2 sat receiver. I have my 3x2000 flashed to 2.4

Any Help you can offer would be awesome.

Gravy

[cillyjr]

Originally Posted by gravythe clown

cillyjr have you got yours to fly? Also why for the diffrence with using 6ch receiver verses 8?

I'm trying to set this up on a Blade SR I'm converting and am having difficulties finding answers on setting this up for spektrum satellite control.

I'm using DX9 and DSM2 sat receiver. I have my 3x2000 flashed to 2.4

Any Help you can offer would be awesome.

Gravy

I'm sorry for delay, I haven't read forum till now.
Let me know if you still got the problem...