Register Now

dinizhobby · 05-06-2009, 09:16 AM

Hello Guys,

Below pictures of my TREX 450 Pro

Rascar · 05-06-2009, 09:03 PM

Mine

http://forum.modelisme.com/viewtopic.php?id=178966&p=3

Do you have a link for the Anti Taco Device ? I don't understand what is this upgrate...(because of my poor english)

Thank's and have great flying !

NotEnoughTime · 05-07-2009, 01:42 AM

Quote:

Originally Posted by Rascar

Mine

http://forum.modelisme.com/viewtopic.php?id=178966&p=3

Do you have a link for the Anti Taco Device ? I don't understand what is this upgrate...(because of my poor english)

Thank's and have great flying !

Nice idea with the ESC power wires.

ATD vid. http://video.helifreak.com/?subpath=...lename=atd.wmv

ATD pics. https://www.helifreak.com/showthread...ti+taco+device

Saves your LiPo from a "Taco" or getting damaged.

Rascar · 05-07-2009, 04:01 AM

Many thank's for the links

ken22golf · 05-07-2009, 05:28 PM

Quote:

Originally Posted by ligteltelecom

Hello Guys,

Below pictures of my TREX 450 Pro

Hey legteltelecom

If you buy some Easy Off oven cleaner from wal-mart, you can take that blue anodizing off the tail servo mounts. It was fairly quick and easy. I didn't scrub anything, I just sprayed some on and let it sit for a while, rinsed it off, sprayed some more, waited, rinsed again, and repeated until all the blue was gone.

dinizhobby · 05-08-2009, 07:37 AM

Quote:

Originally Posted by ken22golf

Hey legteltelecom

If you buy some Easy Off oven cleaner from wal-mart, you can take that blue anodizing off the tail servo mounts. It was fairly quick and easy. I didn't scrub anything, I just sprayed some on and let it sit for a while, rinsed it off, sprayed some more, waited, rinsed again, and repeated until all the blue was gone.

Thanks for info !

caotri · 05-09-2009, 05:30 AM

Quote:

Originally Posted by mahbouni

Nice one! Where did you get those tail servo mounts? How did you extend the TT and where did you get the boom from?

The tail servo hold is from microheli. which can easy get from flying-hobby or helidirect.
The boom is G5 outrage boom , the tube has been exten by replace the alu tube with longer carbon tube 4mm.

it awaesome with this config.

regards
caotri

mahbouni · 05-09-2009, 07:32 AM

thanks

Canuckhelifreak · 05-09-2009, 07:40 PM

Here are my pics...
LOVE this heli!!
http://kelownaheliflyers.ca/heli-news/

francisfaustino · 05-12-2009, 12:55 PM

here is mine... i had a tough time fitting the receiver inside the frame... in the end, i just decided to mount it outside because i didn't want to compromise the carbon fiber frame interfering with the 2.4gHz signals...

haha101 · 05-12-2009, 01:20 PM

here is mine not the best camera

caercj · 05-13-2009, 10:53 PM

Where do you guys get that braided Gyro cable? Is it heavy?
Sure looks nice!

haha101 · 05-13-2009, 10:55 PM

its very light http://www.readyheli.com/Servo_Braid_Kits_s/233.htm

heliboy88 · 05-14-2009, 01:39 AM

Quote:

Originally Posted by haha101

its very light http://www.readyheli.com/Servo_Braid_Kits_s/233.htm

But what size is everyone using? 1/2", 1/4", or 1/8"?

Thanks a lot.

regards,

NotEnoughTime · 05-14-2009, 02:39 AM

Get 1/4 and 1/8, you will have options to use either based on personal preference.

ken22golf · 05-14-2009, 06:37 PM

Quote:

Originally Posted by NotEnoughTime

Get 1/4 and 1/8, you will have options to use either based on personal preference.

+1 I used 1/8 for single wires and 1/4 for two or folded wires.

heliboy88 · 05-15-2009, 12:09 AM

Thanks a lot for sharing guys, i'll get those if i order parts again.

regards,

wilywampa · 05-15-2009, 12:36 AM

Here are pictures after my first flight, which was about 20 minutes ago. It was in my driveway at night, so all I did was a quick hover. That was actually the second attempt. On the first attempt, I suddenly lost power while it was spooling up, and the receiver wouldn't turn on anymore when I connected the battery. I took it apart and measured the BEC voltage to make sure it was still working, and then it worked again when I put it all back together. I hope that doesn't happen again, because I still don't know what the cause was.

By the way, taking pictures of a black helicopter with a black table as a background probably wasn't the best idea. Oh well.

RCHeliRC · 05-15-2009, 10:58 PM

NotEnoughTime · 05-16-2009, 03:21 AM

Nice pics.

Get some black skids on your Fusuno Pro, I put some on mine with the Fusuno and it set it off for sure.

05-06-2009, 09:16 AM	#41 (permalink)
dinizhobby Registered Users Join Date: Mar 2008	My Trex-450 Pro - Pictures Hello Guys, Below pictures of my TREX 450 Pro Attached Thumbnails

05-09-2009, 07:32 AM	#48 (permalink)
mahbouni Registered Users Join Date: Jan 2007	thanks __________________ Oxy2 210 \| Oxy3 285 \| Oxy4 380 \| Logo 480XX \| 600SX \| 650SX \| 690SX \| 700 \| 700XX \| VControl

05-09-2009, 07:40 PM	#49 (permalink)
Canuckhelifreak Registered Users My HF Map location Join Date: Oct 2007	More 450 Pro pics! Here are my pics... LOVE this heli!! http://kelownaheliflyers.ca/heli-news/ __________________ Beam Canada Factory Pilot/ Customer Support. Flying's not a hobby... It's an addiction! Keep 'em shiny Boys! http://kelownaheliflyers.wordpress.com

05-12-2009, 01:20 PM	#51 (permalink)
haha101 Registered Users My HF Map location Join Date: Feb 2008	here is mine not the best camera Attached Thumbnails

05-13-2009, 10:53 PM	#52 (permalink)
caercj Registered Users Join Date: May 2009	Braided Gyro Cable Where do you guys get that braided Gyro cable? Is it heavy? Sure looks nice!

05-06-2009, 09:03 PM	#42 (permalink)
Rascar Join Date: May 2009	Mine http://forum.modelisme.com/viewtopic.php?id=178966&p=3 Do you have a link for the Anti Taco Device ? I don't understand what is this upgrate...(because of my poor english) Thank's and have great flying !

05-07-2009, 04:01 AM	#44 (permalink)
Rascar Join Date: May 2009	Many thank's for the links

05-12-2009, 12:55 PM	#50 (permalink)
francisfaustino Registered Users Join Date: Jan 2009	here is mine... i had a tough time fitting the receiver inside the frame... in the end, i just decided to mount it outside because i didn't want to compromise the carbon fiber frame interfering with the 2.4gHz signals...

05-13-2009, 10:55 PM	#53 (permalink)
haha101 Registered Users My HF Map location Join Date: Feb 2008	its very light http://www.readyheli.com/Servo_Braid_Kits_s/233.htm

05-14-2009, 02:39 AM	#55 (permalink)
NotEnoughTime Registered Users Join Date: Oct 2008	Get 1/4 and 1/8, you will have options to use either based on personal preference.

05-15-2009, 12:09 AM	#57 (permalink)
heliboy88 Registered Users Join Date: Dec 2006	Thanks a lot for sharing guys, i'll get those if i order parts again. regards, __________________ Richard (rich) Trex SE v2 -- HS65MG, GY401+9257, CC35, 430XL, GG, G Paddles, K&B Tail Blades Trex 500 CF -- HS82MG, GY401+9257, stock ESC and motor, Align metal upgrades, K&B Tail Blades

05-15-2009, 12:36 AM	#58 (permalink)
wilywampa Registered Users My HF Map location Join Date: Feb 2009	Here are pictures after my first flight, which was about 20 minutes ago. It was in my driveway at night, so all I did was a quick hover. That was actually the second attempt. On the first attempt, I suddenly lost power while it was spooling up, and the receiver wouldn't turn on anymore when I connected the battery. I took it apart and measured the BEC voltage to make sure it was still working, and then it worked again when I put it all back together. I hope that doesn't happen again, because I still don't know what the cause was. By the way, taking pictures of a black helicopter with a black table as a background probably wasn't the best idea. Oh well. Attached Thumbnails

05-15-2009, 10:58 PM	#59 (permalink)
RCHeliRC Registered Users Join Date: Mar 2009	Why build one when one can build two

05-16-2009, 03:21 AM	#60 (permalink)
NotEnoughTime Registered Users Join Date: Oct 2008	Nice pics. Get some black skids on your Fusuno Pro, I put some on mine with the Fusuno and it set it off for sure.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in