Walkera Tail Motor Casing

bobrains · 02-12-2010, 03:01 PM

Just curious if anyone else has had this issue. I've had tail motors on 2 Walkera helis (a CB100 and a 4G3) where the outer casing of the tail motor has come off completely. I can slip it back onto the motor and it still flys but can easily be slipped off at will.

I'm wondering if anyone else has had this issue and if so, if there is a way to reconnect it. I've looked through schematics and tried to look at the motor to see what may have held it there securely to begin with to no avail.

Any info is appreciated.

Bob

john aeras · 02-12-2010, 07:57 PM

That is absolutly normal with walkera stock BL tail motors! You can't do much about it, other than upgrade to a 2.9g when the stock burns out!

02-12-2010, 03:01 PM	#1
bobrains Registered Users Join Date: Jan 2010 Location: Richmond, KY	Walkera Tail Motor Casing Just curious if anyone else has had this issue. I've had tail motors on 2 Walkera helis (a CB100 and a 4G3) where the outer casing of the tail motor has come off completely. I can slip it back onto the motor and it still flys but can easily be slipped off at will. I'm wondering if anyone else has had this issue and if so, if there is a way to reconnect it. I've looked through schematics and tried to look at the motor to see what may have held it there securely to begin with to no avail. Any info is appreciated. Bob

02-12-2010, 07:57 PM	#2
john aeras Registered Users Join Date: Nov 2008 Location: Canada	That is absolutly normal with walkera stock BL tail motors! You can't do much about it, other than upgrade to a 2.9g when the stock burns out! __________________ *Some people have a problem for every solution...*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode