Post your Night Rig Pics and Videos - Page 3

ChrisH · 05-23-2011, 12:44 PM

Quote:

Originally Posted by Stallion

@ChrisH

I use Torsion Night Blades main and tail blades. The Mains are a little bit soft but they light up pretty good. Tail authority is good though.

I've ran Torsion mains before and they are alright but not great, especially once you go FBL.

I was most interested about the tails because I can't seem to find 95mm night blades anywhere. They're all out of stock ... Where'd ya get yours?

Stallion · 05-24-2011, 11:08 AM

i got mine at www.freakware.com

yeah you are right about the mains but they do all right form me and i have them on my 600N FB.

I am not hardcore yet especially at night. i am looking for the xero gear for Main blades but i can not find a store who stock their stuff for modifying main blades!!! not over here in europe anyway!

ChrisH · 05-24-2011, 12:35 PM

Quote:

Originally Posted by Stallion

i got mine at www.freakware.com

yeah you are right about the mains but they do all right form me and i have them on my 600N FB.

I am not hardcore yet especially at night. i am looking for the xero gear for Main blades but i can not find a store who stock their stuff for modifying main blades!!! not over here in europe anyway!

Wow, $55 USD ... cheaper than I've seen them anywhere else. But I bet shipping will kill me.

Do you like the blades? Any more details about how they work? Are they the usual pin style like the mains?

Edit: Holy CRAP ... $100+ for shipping.

67air · 06-13-2011, 08:52 PM

Nice Job----Looks good !

ChrisH · 06-13-2011, 11:00 PM

My new Logo 500 in it's night attire:

261 LEDs total ... I think it is plenty visible!

rivit · 06-19-2011, 07:23 AM

[ATTACH]

Click image for larger version

Name: IMG_0895.jpg
Views: 203
Size: 26.6 KB
ID: 234930

[/ATTACH
My first night flyer
Can't wait to get it out.

kaos · 06-29-2011, 01:11 AM

Here is my 2nd night light heli and with my 1st pair of DIY night blades - works great.
there are only 3 led on each blade red on top of one blade and blue on bottom of the other blade. At close to 3K rpm, you can't see the difference if both blades has symmetrical lights on each side. Weight and CG are perfectly matched.

EXI CF SE V2
Tpro mg90 clyclic
md922 tail
gy48v gyro
Tpro 40A ESC
Turnigy 40V SBEC
Turnigy X9 Tx and 8ch Rx

pics shows how the blades are made (not very neat, this is my 1st DIY pair ever made), main circuits are made of conductive copper tape directly taped on the circuit of led strip modified from HK led strip. The led were 3 in series, converted to 3 in parallel. use a jumper to short / complete + circuit wire to turn on the light. the 3rd pin is a (-) lead for charging.
cost of blades: CF blade 6.50/pair, 130 mah 1S lipo 0.99 x 2, leds and copper tape less than 1.00

the last pic shows the heli led before the night light blades and floats were put on there.

ChrisH · 06-29-2011, 01:43 AM

I fixed your posts, kaos. Please click Edit on your post to see how YT embeds work.

kaos · 06-29-2011, 11:10 AM

thx Chris. I was about to write to you about deleting the mess up I made but you already fixed it. good work as the moderator.

ChrisH · 06-29-2011, 12:53 PM

Just as a note usually we don't delete posts unless it's porn or spam, but duplicates sometimes also apply.

BOcnc · 07-06-2011, 06:41 AM

BOcnc · 07-06-2011, 06:48 AM

RGB grafix rotorblades night fight in germany

YouTube

BOcnc · 07-06-2011, 07:02 AM

My new Homemade blades

Lostthoughts · 07-11-2011, 05:30 PM

Hey BOcnc how did you accomplish that?

Corvallis · 08-04-2011, 03:13 PM

sorry im a complete noob, how do you get power to the lights on the blades?

BOcnc · 08-04-2011, 04:06 PM

There are 56 RGB LEDs in the Blades. One Lipo and the Control is under the Blade

BOcnc · 08-04-2011, 04:13 PM

sorry my english

A PC program can load a BMP Image and store it on a Micro SD Card on the Control with USB.

Corvallis · 08-04-2011, 08:28 PM

does that affect lift or control at all?

also where do you get those and for how much cash

BOcnc · 08-05-2011, 02:10 AM

The blades are about 30 grams heavier, the need maybe a bit more power. I have nothing further found. So yes you do even basic aerobatics to see the images.

That's all homemade. I can not find a blade manufacturer

There are mono color from

http://www.kokcomposite.cz/d7-products.html

sewerfly · 09-05-2011, 12:52 AM

Finally did it, went out to the field and flew her

05-24-2011, 11:08 AM	#42
Stallion Registered Users My HF Map location Join Date: Jul 2007 Location: Germany	i got mine at www.freakware.com yeah you are right about the mains but they do all right form me and i have them on my 600N FB. I am not hardcore yet especially at night. i am looking for the xero gear for Main blades but i can not find a store who stock their stuff for modifying main blades!!! not over here in europe anyway! __________________ Helis:; Kasama Srimok ECO - V-Bar; Kasama Faifa LRH V-Bar!!! Radio: MX-20 Hott

06-13-2011, 11:00 PM	#45
ChrisH HF Support Join Date: Aug 2007 Location: CA	My new Logo 500 in it's night attire: 261 LEDs total ... I think it is plenty visible! __________________ Edge Rotorblades Thor/Voltz Batteries 450 Pro V-Bar 130X

06-19-2011, 07:23 AM	#46
rivit Registered Users Join Date: Jun 2011 Location: Australia	[ATTACH][/ATTACH My first night flyer Can't wait to get it out. Attached Thumbnails

06-29-2011, 01:11 AM	#47
kaos Registered Users Join Date: May 2010 Location: US	Here is my 2nd night light heli and with my 1st pair of DIY night blades - works great. there are only 3 led on each blade red on top of one blade and blue on bottom of the other blade. At close to 3K rpm, you can't see the difference if both blades has symmetrical lights on each side. Weight and CG are perfectly matched. EXI CF SE V2 Tpro mg90 clyclic md922 tail gy48v gyro Tpro 40A ESC Turnigy 40V SBEC Turnigy X9 Tx and 8ch Rx pics shows how the blades are made (not very neat, this is my 1st DIY pair ever made), main circuits are made of conductive copper tape directly taped on the circuit of led strip modified from HK led strip. The led were 3 in series, converted to 3 in parallel. use a jumper to short / complete + circuit wire to turn on the light. the 3rd pin is a (-) lead for charging. cost of blades: CF blade 6.50/pair, 130 mah 1S lipo 0.99 x 2, leds and copper tape less than 1.00 the last pic shows the heli led before the night light blades and floats were put on there. Attached Thumbnails

06-29-2011, 01:43 AM	#48
ChrisH HF Support Join Date: Aug 2007 Location: CA	I fixed your posts, kaos. Please click Edit on your post to see how YT embeds work. __________________ Edge Rotorblades Thor/Voltz Batteries 450 Pro V-Bar 130X

06-13-2011, 08:52 PM	#44
67air Registered Users Join Date: Dec 2009 Location: Easton,Ct	Nice Job----Looks good !

06-29-2011, 11:10 AM	#49
kaos Registered Users Join Date: May 2010 Location: US	thx Chris. I was about to write to you about deleting the mess up I made but you already fixed it. good work as the moderator.

06-29-2011, 12:53 PM	#50
ChrisH HF Support Join Date: Aug 2007 Location: CA	Just as a note usually we don't delete posts unless it's porn or spam, but duplicates sometimes also apply. __________________ Edge Rotorblades Thor/Voltz Batteries 450 Pro V-Bar 130X

07-06-2011, 06:41 AM	#51
BOcnc Registered Users Join Date: Jul 2011 Location: Germany	RGB graphix rotorblades helicopter night flight Last edited by BOcnc; 07-10-2011 at 01:32 AM..

07-06-2011, 07:02 AM	#53
BOcnc Registered Users Join Date: Jul 2011 Location: Germany	My new Homemade blades Attached Thumbnails

07-11-2011, 05:30 PM	#54
Lostthoughts Registered Users My HF Map location Join Date: Jun 2011 Location: Bracebridge,Ontario,Ca.	Hey BOcnc how did you accomplish that? __________________ Align 550E V2 ,V-Bar 5.3 ,CC Ice 100, CC BEC Pro, DS650 tail, CF boom.+++ Align TREX 450 sport FBL, DFC, Beastx (AR7200BX), MKS DS95i tail, DX8 Last edited by Lostthoughts; 07-12-2011 at 09:03 AM..

08-04-2011, 03:13 PM	#55
Corvallis Registered Users Join Date: Jul 2011 Location: 10000 lakes	sorry im a complete noob, how do you get power to the lights on the blades?

08-04-2011, 04:06 PM	#56
BOcnc Registered Users Join Date: Jul 2011 Location: Germany	There are 56 RGB LEDs in the Blades. One Lipo and the Control is under the Blade Attached Thumbnails

08-04-2011, 04:13 PM	#57
BOcnc Registered Users Join Date: Jul 2011 Location: Germany	sorry my english A PC program can load a BMP Image and store it on a Micro SD Card on the Control with USB. Attached Thumbnails

08-04-2011, 08:28 PM	#58
Corvallis Registered Users Join Date: Jul 2011 Location: 10000 lakes	does that affect lift or control at all? also where do you get those and for how much cash

08-05-2011, 02:10 AM	#59
BOcnc Registered Users Join Date: Jul 2011 Location: Germany	The blades are about 30 grams heavier, the need maybe a bit more power. I have nothing further found. So yes you do even basic aerobatics to see the images. That's all homemade. I can not find a blade manufacturer There are mono color from http://www.kokcomposite.cz/d7-products.html

09-05-2011, 12:52 AM	#60
sewerfly Registered Users Join Date: Feb 2009 Location: San Diego	Finally did it, went out to the field and flew her Attached Thumbnails __________________ Your To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. is my Bread and Butter. Compass Field Rep / Prostarhobby.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode