mCPx Paper Canopy -- First Aftermarket mCPx Hop-Up? - Page 10

CyLLlKA · 11-29-2011, 03:50 PM

Use the filter layer in Photoshop. Choose how to be better

CyLLlKA · 11-29-2011, 04:02 PM

2 sided draft file Pepacura. It is necessary to specify the size of the model. I do not remember what size it should be. Look at the original and do the same.

mfedasiuk · 11-29-2011, 04:10 PM

Kind of....it is much harder to do it my way since I have to add the Blade logo after the output of papakura...this creates much more work....would still be very appreciative if you could build a 3ds max or papakura template that has a left and right side...

Of course I did figure out a way to do it the hard way!

thx again
Mark

mfedasiuk · 11-29-2011, 04:12 PM

Oops...I didn't see your other posts....thx!!! I will give this a try and see how I do

Mark

Chris20 · 11-29-2011, 08:09 PM

Quote:

Originally Posted by mfedasiuk

See attached

I can't get these to open in Papakura designer at all. Will only find a PDO file.

Davy Crockett · 11-30-2011, 04:08 AM

Quote:

Originally Posted by ccnada

Now I just have to figure out how to get the TDR style skids! Any ideas? Can we make them out of paper! Haha!

I have these skids on my mcpx, not exactly the same but close??

ccnada · 11-30-2011, 09:21 AM

Quote:

Originally Posted by Davy Crockett

I have these skids on my mcpx, not exactly the same but close??

Those are sweet! That would be a great stocking stuffer.

I too can't figure out how to make the TDR canopy from the papakura designer templates. Would you be able to convert them to the jpg style printout? You can leave out the Blade logo if its too difficult. You should put your own sig on them since they are your own unique designs!

How about a Paper Goblin Canopy/Boom style next!!!

mfedasiuk · 11-30-2011, 11:37 AM

Go to page 12 of this thread and download CyLLIKA's hensel carbon green pdo and texture map...then swap out the texture map with any of the ones I have posted in papakura designer......

http://www.helifreak.com/showthread....288157&page=12

If you have trouble doing that I will post futher instructions......CyLLIKA posted lots of original templates that I have simply modified in photoshop to my liking

Let me know if this works for you....i think the texturemaps are under "other options" in papakura...

Also I have full sheet .jpg files I have posted that can just be printed as is if you like thosedesigns...

Mark

tntburnett · 11-30-2011, 08:15 PM

Quote:

Originally Posted by mfedasiuk

see attached and enjoy!
Mark

Thank you for the other canopies they look good. Here is one I printed today.

Be blessed
Isaac

ccnada · 12-01-2011, 03:43 AM

Thanks so much mfedasiuk & CyLLlKA. I figured out how to use the templates per mfedasiuk instructions and those templates are sweet! I made this one and I realized a few things in hopes to help others that use papakura. When you print makes sure to make the folding lines 100% transparent or the lines will pop up on the print out. Also say no when printer's margins don't match and asks you if you'd like them to line up. If you say yes, the print out will be too small. Well thats how mine was.

I've made about 7-8 of these suckers and have been giving some of my initial ones away to my friends. It only gets better from here especially with mfedasiuk templates! So excited I also ordered some TDR syle skids as well!

I'll post pics with skids once they come and probably a different canopy! Haha!

mfedasiuk · 12-02-2011, 09:26 AM

see attached

Mark

Click image for larger version

Name: psyco1.jpg
Views: 1814
Size: 82.9 KB
ID: 270521

Click image for larger version

Name: psyco2.jpg
Views: 1722
Size: 58.8 KB
ID: 270522

DudeInMyrtleBeach · 12-02-2011, 10:06 AM

I think I caught a buzz looking at that one...

mfedasiuk · 12-02-2011, 12:20 PM

Thanks! Will post more templates soon...

Mark

tntburnett · 12-02-2011, 02:41 PM

I like that

Be blessed
Isaac

Sent from my DROIDX

mfedasiuk · 12-02-2011, 03:30 PM

See attached

These are fun!

Mark

CyLLlKA · 12-02-2011, 03:37 PM

Can you sell me a canopy?

pkm_heliman · 12-02-2011, 06:11 PM

Still waiting for an Airfwolf fuse! Anyone figured it out yet?!!?

Chris20 · 12-02-2011, 07:16 PM

Got it. Once I changed the texture it worked perfect. Thanks again.

ccnada · 12-02-2011, 07:26 PM

Quote:

Originally Posted by mfedasiuk

See attached

These are fun!

Mark

OMG, why do you tease us so much! The templates would be an awesome christmas gift!!! Those designs are amazing.

755 robert · 12-02-2011, 11:09 PM

These are awesome

..Has anyone else noticed how quiet the heli is with the paper canopy?I just tried one on my HP07 bird and it is almost silent compared with the plastic fuse...

..Keep em coming..

12-01-2011, 03:43 AM	#190
ccnada Registered Users Join Date: Jun 2009 Location: Temecula, Ca	figured it out and now I'm going crazy! Thanks so much mfedasiuk & CyLLlKA. I figured out how to use the templates per mfedasiuk instructions and those templates are sweet! I made this one and I realized a few things in hopes to help others that use papakura. When you print makes sure to make the folding lines 100% transparent or the lines will pop up on the print out. Also say no when printer's margins don't match and asks you if you'd like them to line up. If you say yes, the print out will be too small. Well thats how mine was. I've made about 7-8 of these suckers and have been giving some of my initial ones away to my friends. It only gets better from here especially with mfedasiuk templates! So excited I also ordered some TDR syle skids as well! I'll post pics with skids once they come and probably a different canopy! Haha! Attached Thumbnails __________________ X5, DX7se My son Enzo's - X5, mcpxBL, DX7se

12-02-2011, 09:26 AM	#191
mfedasiuk Registered Users Join Date: Nov 2010 Location: Chandler, AZ	Here is my latest design.... see attached Mark

12-02-2011, 02:41 PM	#194
tntburnett Registered Users Join Date: Feb 2009 Location: charlotte nc	I like that Be blessed Isaac Sent from my DROIDX __________________ Jesus Rep all over, Team Outrage USA Rep Orange Power To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. O Fusion 50, BL mcpx ultra, 700e, trex 450 pro all FBL 3g, vbar 5.1(blk), 3g, kds ebar GOD BLESS

12-02-2011, 03:30 PM	#195
mfedasiuk Registered Users Join Date: Nov 2010 Location: Chandler, AZ	Here is another version I call funk :) See attached These are fun! Mark Attached Thumbnails

12-02-2011, 11:09 PM	#200
755 robert Registered Users Join Date: Feb 2010 Location: central coast of California	These are awesome ..Has anyone else noticed how quiet the heli is with the paper canopy?I just tried one on my HP07 bird and it is almost silent compared with the plastic fuse.....Keep em coming.. __________________ 700 class nitro,2X 600class electric,2X 450class,250 class,130 class,a few mcpx class( To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. ).Dx-7.All helis fbl...If I had a dollar for every dollar I've spent on heli's ...I would break even. .Who is John Galt?

11-29-2011, 03:50 PM	#181
CyLLlKA Registered Users Join Date: Jul 2011 Location: Ukraine, Kiev	Use the filter layer in Photoshop. Choose how to be better

11-29-2011, 04:10 PM	#183
mfedasiuk Registered Users Join Date: Nov 2010 Location: Chandler, AZ	Kind of....it is much harder to do it my way since I have to add the Blade logo after the output of papakura...this creates much more work....would still be very appreciative if you could build a 3ds max or papakura template that has a left and right side... Of course I did figure out a way to do it the hard way! thx again Mark

11-29-2011, 04:12 PM	#184
mfedasiuk Registered Users Join Date: Nov 2010 Location: Chandler, AZ	Oops...I didn't see your other posts....thx!!! I will give this a try and see how I do Mark

11-30-2011, 11:37 AM	#188
mfedasiuk Registered Users Join Date: Nov 2010 Location: Chandler, AZ	Go to page 12 of this thread and download CyLLIKA's hensel carbon green pdo and texture map...then swap out the texture map with any of the ones I have posted in papakura designer...... http://www.helifreak.com/showthread....288157&page=12 If you have trouble doing that I will post futher instructions......CyLLIKA posted lots of original templates that I have simply modified in photoshop to my liking Let me know if this works for you....i think the texturemaps are under "other options" in papakura... Also I have full sheet .jpg files I have posted that can just be printed as is if you like thosedesigns... Mark

12-02-2011, 10:06 AM	#192
DudeInMyrtleBeach Registered Users My HF Map location Join Date: Jun 2011 Location: Myrtle Beach	I think I caught a buzz looking at that one...

12-02-2011, 12:20 PM	#193
mfedasiuk Registered Users Join Date: Nov 2010 Location: Chandler, AZ	Thanks! Will post more templates soon... Mark

12-02-2011, 03:37 PM	#196
CyLLlKA Registered Users Join Date: Jul 2011 Location: Ukraine, Kiev	Can you sell me a canopy?

12-02-2011, 06:11 PM	#197
pkm_heliman Registered Users Join Date: Nov 2009 Location: The Peoples Republic of Texas	Still waiting for an Airfwolf fuse! Anyone figured it out yet?!!?

12-02-2011, 07:16 PM	#198
Chris20 Registered Users Join Date: Jan 2011 Location: Michigan	Got it. Once I changed the texture it worked perfect. Thanks again.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode