picloc 3xpro worth the money??

MaSt0RaS · 09-01-2011, 01:24 PM

Hello guys i want to buy this picloc what do you think is it worth the money??!

Does it stabilize well whats pros and cons?!

tahoelight · 09-01-2011, 02:27 PM

It has not been released yet, but they are suppose to ship in a few weeks. I would also be curious to hear if anyone who beta tested these units could offer their experiences. I have one reserved and looking forward to sharing my experience with it.

MaSt0RaS · 09-01-2011, 02:52 PM

generally the piclocs...! i might purschase one too..!

tott · 09-02-2011, 01:00 PM

I also am interested in any feedback about the new 3X PRO...

Perhaps now it is all speculation since it has not been released yet ??

The specs look AWESOME, with the future releases will really make this stand out form the crown of other options....

I am also in line for one of the first releases so I will update once received and installed..

MAHALO,
JASON

tott · 09-10-2011, 02:11 PM

The initial test (product review) videos are now up for the 3X-PRO.

As shown below:

http://www.rotorpics.com/

The first run of these were to ship the beginning of October, so hopefully we will have more info/reviews shortly and prior to the release.

JASON

hogfarmer · 09-10-2011, 05:26 PM

Quote:

Originally Posted by tott

Stand out form the crown of other options

What other options??

Quote:

The first run of these were to ship the beginning of September, so hopefully we will have more info/reviews shortly.

Actually the first run was supposed to be done sometime around August or September of 2010 (over a year ago).

tott · 09-10-2011, 05:32 PM

UPDATED INFORMATION........

Please be advised that the release date I previously stated as September we INCORRECT.

I apologize for the missinformation, It is actually slated for early OCTOBER 2011 release...

I updated the above post to reflect this information as well...

JASON

MaSt0RaS · 09-11-2011, 07:14 AM

i have ordered too with the 3xpt...!

Windbreaker · 09-12-2011, 02:48 PM

The URL http://www.rotorpics.com/ isn't working. Server down?

HeliG · 09-12-2011, 06:30 PM

Hi, This is George from Picloc.

I just came in from work and saw a large number of emails with the same question above.
I saw also this thread, because I was informed about it.

Yes.. it seems my ISP has had a big failure somewhere in the chain.
Hopefully, it will be re-upped as soon as data backup procedures are ready.

Thanks, and sorry for the inconvenience.

HeliG · 09-12-2011, 06:33 PM

@Hogfarmer... those were called Picloc-2X.

tott · 10-20-2011, 02:48 AM

Did these start to ship yet ???

JASON

daruq7 · 10-20-2011, 03:18 AM

Not yet. Another couple of weeks at least.

Regards,
Dariusz

HeliG · 10-20-2011, 04:37 AM

Should be shipping out 2nd week of Nov.
Thanks

MaSt0RaS · 10-20-2011, 04:44 AM

Quote:

Originally Posted by HeliG

Should be shipping out 2nd week of Nov.
Thanks

OOoo

too late...!

HeliG · 10-20-2011, 04:53 AM

I'm trying my best to shorten the wait as much as possible. Please bear with me. Hardware has to be perfect. This is reason for delay.

HeliG · 10-20-2011, 05:10 AM

Let me explain...
The P3X PCB board is complex 'multilayer', and tracks are very dense.
Unfortunately I introduced a tiny mistake ( my fault... too many late nights )
in the inner layers, and this means a costly reprint....as well as the delay mentioned.

I will not release a PCB with jumpers to correct mistakes. PCB has to be Perfect.
Please bear with me for last few days. Thanks !!

Goldenhour · 10-20-2011, 11:38 AM

I too am waiting for the reviews. Let's hope.

seattle_helo · 11-20-2011, 01:51 AM

Hi George- any updates?

HeliG · 11-20-2011, 02:18 AM

Yes..they're here... friggin customs are keeping them till 2morrow.
Hope final assy process goes fine and I should be shipping out soon.

09-01-2011, 01:24 PM	#1
MaSt0RaS Registered Users Join Date: Apr 2008 Location: Greece	picloc 3xpro worth the money?? Hello guys i want to buy this picloc what do you think is it worth the money??! Does it stabilize well whats pros and cons?! __________________ AP Logo600SX:Pyro 700-52 -Vbar-3x610 -bls251-Vbar GOv-Hw PL120HV-Thundepower Logo6003dXera 560 - VbarGov - 3x8717 - Bls251 - Hobbywing PL 120Hv-Thunderpower Cinestar 8 Cs gimbal - HoverFlypro - Tiger motors 710-Radians-Turnigy Plush 40A

09-01-2011, 02:52 PM	#3
MaSt0RaS Registered Users Thread Starter Join Date: Apr 2008 Location: Greece	generally the piclocs...! i might purschase one too..! __________________ AP Logo600SX:Pyro 700-52 -Vbar-3x610 -bls251-Vbar GOv-Hw PL120HV-Thundepower Logo6003dXera 560 - VbarGov - 3x8717 - Bls251 - Hobbywing PL 120Hv-Thunderpower Cinestar 8 Cs gimbal - HoverFlypro - Tiger motors 710-Radians-Turnigy Plush 40A

09-02-2011, 01:00 PM	#4
tott Registered Users Join Date: Dec 2008 Location: Maui	..... I also am interested in any feedback about the new 3X PRO... Perhaps now it is all speculation since it has not been released yet ?? The specs look AWESOME, with the future releases will really make this stand out form the crown of other options.... I am also in line for one of the first releases so I will update once received and installed.. MAHALO, JASON

09-10-2011, 02:11 PM	#5
tott Registered Users Join Date: Dec 2008 Location: Maui	.... The initial test (product review) videos are now up for the 3X-PRO. As shown below: http://www.rotorpics.com/ The first run of these were to ship the beginning of October, so hopefully we will have more info/reviews shortly and prior to the release. JASON Last edited by tott; 09-10-2011 at 05:33 PM.. Reason: added URL

09-10-2011, 05:32 PM	#7
tott Registered Users Join Date: Dec 2008 Location: Maui	.... UPDATED INFORMATION........ Please be advised that the release date I previously stated as September we INCORRECT. I apologize for the missinformation, It is actually slated for early OCTOBER 2011 release... I updated the above post to reflect this information as well... JASON

09-01-2011, 02:27 PM	#2
tahoelight Registered Users Join Date: Jan 2010 Location: Lake Tahoe	It has not been released yet, but they are suppose to ship in a few weeks. I would also be curious to hear if anyone who beta tested these units could offer their experiences. I have one reserved and looking forward to sharing my experience with it.

09-11-2011, 07:14 AM	#8
MaSt0RaS Registered Users Thread Starter Join Date: Apr 2008 Location: Greece	i have ordered too with the 3xpt...! __________________ AP Logo600SX:Pyro 700-52 -Vbar-3x610 -bls251-Vbar GOv-Hw PL120HV-Thundepower Logo6003dXera 560 - VbarGov - 3x8717 - Bls251 - Hobbywing PL 120Hv-Thunderpower Cinestar 8 Cs gimbal - HoverFlypro - Tiger motors 710-Radians-Turnigy Plush 40A

09-12-2011, 02:48 PM	#9
Windbreaker Registered Users My HF Map location Join Date: Sep 2007 Location: Waipahu, HI	The URL http://www.rotorpics.com/ isn't working. Server down? __________________ Custom quad copter, Cobra C-3525/18 motors and ESCs; APC 15x4 thin electric props. OpenPilot ControlCopter board. Futaba 8FG Super 2.4 gHz FAAST system.

09-12-2011, 06:30 PM	#10
HeliG Registered Users Join Date: Nov 2005 Location: Europe	Hi, This is George from Picloc. I just came in from work and saw a large number of emails with the same question above. I saw also this thread, because I was informed about it. Yes.. it seems my ISP has had a big failure somewhere in the chain. Hopefully, it will be re-upped as soon as data backup procedures are ready. Thanks, and sorry for the inconvenience. Last edited by HeliG; 09-13-2011 at 07:48 AM..

09-12-2011, 06:33 PM	#11
HeliG Registered Users Join Date: Nov 2005 Location: Europe	@Hogfarmer... those were called Picloc-2X. Last edited by HeliG; 09-13-2011 at 07:48 AM..

10-20-2011, 02:48 AM	#12
tott Registered Users Join Date: Dec 2008 Location: Maui	.... Did these start to ship yet ??? JASON

10-20-2011, 03:18 AM	#13
daruq7 Registered Users Join Date: Sep 2010 Location: Scunthorpe, UK	Not yet. Another couple of weeks at least. Regards, Dariusz

10-20-2011, 04:37 AM	#14
HeliG Registered Users Join Date: Nov 2005 Location: Europe	Should be shipping out 2nd week of Nov. Thanks

10-20-2011, 04:53 AM	#16
HeliG Registered Users Join Date: Nov 2005 Location: Europe	I'm trying my best to shorten the wait as much as possible. Please bear with me. Hardware has to be perfect. This is reason for delay.

10-20-2011, 05:10 AM	#17
HeliG Registered Users Join Date: Nov 2005 Location: Europe	Let me explain... The P3X PCB board is complex 'multilayer', and tracks are very dense. Unfortunately I introduced a tiny mistake ( my fault... too many late nights ) in the inner layers, and this means a costly reprint....as well as the delay mentioned. I will not release a PCB with jumpers to correct mistakes. PCB has to be Perfect. Please bear with me for last few days. Thanks !!

10-20-2011, 11:38 AM	#18
Goldenhour Registered Users Join Date: Jun 2009 Location: Vancouver,Wa.	I too am waiting for the reviews. Let's hope.

11-20-2011, 01:51 AM	#19
seattle_helo Registered Users Join Date: Jul 2006 Location: Seattle, WA USA	Hi George- any updates?

11-20-2011, 02:18 AM	#20
HeliG Registered Users Join Date: Nov 2005 Location: Europe	Yes..they're here... friggin customs are keeping them till 2morrow. Hope final assy process goes fine and I should be shipping out soon.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode