Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > For Sale Forums KNOW your buyer/seller ratings! No Price bashing. NO FIREARMS > Gas, Glow and Turbine Helicopters


Gas, Glow and Turbine Helicopters *No Commercial Ads - Liquid Fueled Helis Only


Closed Thread
 
Thread Tools Display Modes
Old 03-20-2012, 06:01 PM   #1
Scott1115
Registered Users
 

Join Date: Apr 2010
Location: Greenwich, CT
Default Trex 600N BNF

I've decided to sell my fly-bared helicopter, it flies soooo well.

-Trex 600N with upgraded metal elevator arm set and pitch/aileron levers and metal tail grips.
-Align/OS 50H with new SS bearings from RC Bearings (as of last night) and new gaskets and new glow plug (OS #8) - no fuel through it yet. There is a chip in the front muffler mount screw hole. It DOES NOT effect the seal of the muffler at all and it DOES NOT effect the performance.
-Align high performance pipe
-Fut S9542's on cyclic controls
-Fut 3151 on throttle
-Fut 520 gyro
-Fut BLS 251 on tail
-CYG ATG governor with back plate sensor
-Align 2 in 1 regulator
-Fut 6008HS receiver
-2 Relion 2600mAh lithium-ion batteries
-2 canopies - original "beater" and clean aftermarket canopy bought at a fun fly (it's been on heli twice)

Cost $1580.00 new,asking $800.00
PP and shipped, which seems to be on par with other 600N's for sale with lesser electronics, mine are better.

Last edited by Scott1115; 03-30-2012 at 12:58 PM..
Scott1115 is online now       
Old 03-22-2012, 07:45 AM   #2
Scott1115
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2010
Location: Greenwich, CT
Default

TTT
Scott1115 is online now       
Old 03-23-2012, 06:01 PM   #3
Scott1115
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2010
Location: Greenwich, CT
Default

Put 6 lights on the helicopter today. Engine runs great and it flies so well.
Scott1115 is online now       
Old 03-24-2012, 07:32 PM   #4
Scott1115
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2010
Location: Greenwich, CT
Default

Come on guys, this heli ROCKS!!! I need to sell to fund a Compass 7HV. Make a fair offer and it is yours.
Scott1115 is online now       
Old 03-25-2012, 04:23 PM   #5
Scott1115
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2010
Location: Greenwich, CT
Default Video taken 03/24/12



Sorry image quality isn't great - it was very windy and overcast. But you can see it runs and flies great!
Scott1115 is online now       
Old 03-27-2012, 08:07 PM   #6
Scott1115
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2010
Location: Greenwich, CT
Default

BUY ME
Scott1115 is online now       
Old 03-31-2012, 10:22 PM   #7
Scott1115
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2010
Location: Greenwich, CT
Default

^up top^
Scott1115 is online now       
Old 04-05-2012, 10:32 AM   #8
Scott1115
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2010
Location: Greenwich, CT
Default

bump
Scott1115 is online now       
Old 04-07-2012, 09:49 PM   #9
Scott1115
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2010
Location: Greenwich, CT
Default Easter/Passover sale

Easter Sunday, may 8th only - $100.00 off!!!!!

$700.00 PP'd and shipped
Scott1115 is online now       
Old 04-08-2012, 10:44 AM   #10
MrHeliNewbie
Registered Users
 
Posts: 216
 

Join Date: Oct 2011
Location: Front Royal Va.
Default

ok that price has me wanting to ask....
I this the belt drive 600N V1 Align..... ( same head and tail setup as the Align 600E V1 )
__________________
Tarot 500/550 9s / Tarot 450ProV2 4s / 600E V1 8s
Academy Of Model Aeronautics 98418
If Align put their name on a pile of dog crap stuck 2 blades in it and packaged it in a super combo, people would get in line to pre order. I just dont get it
MrHeliNewbie is offline       
Old 04-08-2012, 01:01 PM   #11
Scott1115
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2010
Location: Greenwich, CT
Default

No, its not the same. This has a torque tube, always did. Came from box as a TT. It was the V1 600Nitro pro with upgraded parts to make it an "LE", less the metal grips. I have it priced to sell because i want to fund a Compass 7HV or a Synergy E7.

Last edited by Scott1115; 04-08-2012 at 04:14 PM..
Scott1115 is online now       
Old 04-10-2012, 08:58 PM   #12
Scott1115
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2010
Location: Greenwich, CT
Default

TTT
Scott1115 is online now       
Old 04-14-2012, 11:57 AM   #13
Scott1115
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2010
Location: Greenwich, CT
Default

weekend bump
Scott1115 is online now       
Old 04-16-2012, 12:24 PM   #14
Scott1115
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2010
Location: Greenwich, CT
Default Price redused

Now asking $700.00, if not sold I will part out soon.

Need to fund another project.
Scott1115 is online now       
Closed Thread




Unregistered
Go Back   HeliFreak > For Sale Forums KNOW your buyer/seller ratings! No Price bashing. NO FIREARMS > Gas, Glow and Turbine Helicopters


Gas, Glow and Turbine Helicopters *No Commercial Ads - Liquid Fueled Helis Only

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2011 - William James - Helifreak.com