Outrage Torq BL9188 - Very rough - Page 2

maczar · 07-15-2012, 04:27 PM

My 9188 working with vbar is also very rough (heli is Kasama 90E), but when it's in the air it's smooth as silk. Great servo!

Seasick78 · 07-15-2012, 10:44 PM

I am running a JR-MP80G with an SK540 asked the same question... Crazy ratchetty on the bench but seems to be fine in flight.

desertstalker · 07-16-2012, 12:11 AM

You guys using DSMX? I has a similar experience when running at 11ms, increased it to 22 and servo is as smooth as any other.

Might be worth a shot, doubt most will notice the lower frame rate (I certainly didnt).

Lighty · 07-16-2012, 05:20 AM

Quote:

Originally Posted by desertstalker

You guys using DSMX? I has a similar experience when running at 11ms, increased it to 22 and servo is as smooth as any other.

Might be worth a shot, doubt most will notice the lower frame rate (I certainly didnt).

Will give it a try tomorrow dude.

maczar · 07-16-2012, 08:16 AM

I'm using Dsx11 dsm2, 22ms i think.

kimmik · 07-16-2012, 08:38 AM

I seem to remember that rebinding the sats will fix the problem, regardless of mode.

Seasick78 · 07-16-2012, 09:10 AM

Quote:

Originally Posted by desertstalker

You guys using DSMX? I has a similar experience when running at 11ms, increased it to 22 and servo is as smooth as any other.

Might be worth a shot, doubt most will notice the lower frame rate (I certainly didnt).

How do you change these settings?

desertstalker · 07-16-2012, 08:48 PM

Quote:

Originally Posted by Seasick78

How do you change these settings?

Its in your TX, in the setup menu for the DX8, not sure on others.

Seasick78 · 07-17-2012, 08:04 AM

Oh gotcha. Not running a Spektrum TX.

msallua · 01-05-2013, 11:03 PM

Im' building Goblin 700 and a Torq BL9188 in the tail (BeastX , 760us and 560hz ) and the servo is extremely rough and makes a lot of noise, as well as transmitting a lot of vibration down the carbon tail control rod

Any Help?

davep · 01-07-2013, 03:25 AM

General Consensus is that they are just noisy/rough on the bench but fly exceptionally well.
Just fly it.

jcflyer · 01-07-2013, 08:05 AM

Quote:

Originally Posted by Seasick78

How do you change these settings?

Josh I didn't know you had a Sk???

1004ron · 02-10-2013, 06:44 PM

Quote:

Originally Posted by davep

General Consensus is that they are just noisy/rough on the bench but fly exceptionally well.
Just fly it.

This was bothering me, and after a search revealed this thread, I'll just keep flying it.

Mine is installed on my Goblin 700 and that tail boom makes it sound even worse.

My LB9188 sounds worse in one direction.

GasNerd · 03-04-2013, 03:17 PM

Yeah, my bl9188 make the grinding noise on the ground on my Goblin 500 also. Really wish I would have come across this post a few days ago, before I bought another one ( thought I had a bad one). Oh well - I have a backup or better yet, the start of a new heli!

-GN

07-15-2012, 04:27 PM	#21
maczar Registered Users Join Date: Dec 2011 Location: Poland, Krakow	My 9188 working with vbar is also very rough (heli is Kasama 90E), but when it's in the air it's smooth as silk. Great servo! __________________ KDS 700FBL Innova \| KDS 550 Innova \| KDS 450C \| Trex 450 PRO BeastX \| Radiomodels.com.pl team pilot \| Quadframe.com team pilot

07-15-2012, 10:44 PM	#22
Seasick78 Registered Users Join Date: Feb 2012 Location: Gramling, South Carolina	I am running a JR-MP80G with an SK540 asked the same question... Crazy ratchetty on the bench but seems to be fine in flight. __________________ Helicommand/ bavarianDEMON KDE Direct Jeti USA

07-16-2012, 12:11 AM	#23
desertstalker Registered Users Join Date: Apr 2011 Location: Australia	You guys using DSMX? I has a similar experience when running at 11ms, increased it to 22 and servo is as smooth as any other. Might be worth a shot, doubt most will notice the lower frame rate (I certainly didnt). __________________ -DX8 -MSH MiniProtos Stretched, SK720, DS95/DS95i, Hyp 4S 25C 2500mAh -MSH Protos Stretched, Brain, Hyp DS16/BLS251, 6S 3000mAh

07-16-2012, 08:16 AM	#25
maczar Registered Users Join Date: Dec 2011 Location: Poland, Krakow	I'm using Dsx11 dsm2, 22ms i think. __________________ KDS 700FBL Innova \| KDS 550 Innova \| KDS 450C \| Trex 450 PRO BeastX \| Radiomodels.com.pl team pilot \| Quadframe.com team pilot

07-17-2012, 08:04 AM	#29
Seasick78 Registered Users Join Date: Feb 2012 Location: Gramling, South Carolina	Oh gotcha. Not running a Spektrum TX. __________________ Helicommand/ bavarianDEMON KDE Direct Jeti USA

07-16-2012, 08:38 AM	#26
kimmik Registered Users My HF Map location Join Date: Sep 2011 Location: Australia	I seem to remember that rebinding the sats will fix the problem, regardless of mode.

01-05-2013, 11:03 PM	#30
msallua Registered Users Join Date: Nov 2010 Location: Uruguay	Im' building Goblin 700 and a Torq BL9188 in the tail (BeastX , 760us and 560hz ) and the servo is extremely rough and makes a lot of noise, as well as transmitting a lot of vibration down the carbon tail control rod Any Help? __________________ Sab Goblin 700 Yellow // Align 700 DFC HV. BeastX :// Align 550 V2 DFC. BeastX // Align 450 Pro V2 DFC . BeastX // Futaba 10Chg - Phoenix RC

01-07-2013, 03:25 AM	#31
davep Registered Users Thread Starter Join Date: Mar 2010 Location: Portola Valley, CA USA	General Consensus is that they are just noisy/rough on the bench but fly exceptionally well. Just fly it.

03-04-2013, 03:17 PM	#34
GasNerd Registered Users My HF Map location Join Date: Sep 2011 Location: Pittsburgh	Yeah, my bl9188 make the grinding noise on the ground on my Goblin 500 also. Really wish I would have come across this post a few days ago, before I bought another one ( thought I had a bad one). Oh well - I have a backup or better yet, the start of a new heli! -GN __________________ Whiplash 90N \| Goblin 500 \| Gaui NX4 \| T-REX 600E PRO DFC \| T-REX 550E V2 \| Blade 450X \| Blade 130X \| MCPX BL \| DX8 \| BeastX \| MSH Brain/Ikon \| SK720

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode