G4 Engine fan mount

bitsnpieces · 08-10-2012, 10:25 AM

I'm in the process of building a G4 nitro FBL. Up to this point the kit seems to be high quality and the build is going well. I am having a problem mounting the fan to the O.S. Max 105HZR. The fan hits the regulator on the carb before bottoming out on the front bearing. Can anyone shine a little light on how to resolve this issue. Thanks

KnifeEdgeUk · 08-12-2012, 12:56 PM

Hi mate, just undo the bolt holding the carb in place, and move the carb slighty. Should fit fine. I have a 105HZ-R in my G4.

James

bitsnpieces · 08-12-2012, 01:41 PM

Thats exactly what I did. Works great. Thanks!

08-10-2012, 10:25 AM	#1
bitsnpieces Registered Users Join Date: Apr 2008 Location: Ct	G4 Engine fan mount I'm in the process of building a G4 nitro FBL. Up to this point the kit seems to be high quality and the build is going well. I am having a problem mounting the fan to the O.S. Max 105HZR. The fan hits the regulator on the carb before bottoming out on the front bearing. Can anyone shine a little light on how to resolve this issue. Thanks __________________ TDR, Bergen Intrepid FBL, Raptor Nitro G4 FBL Logo 600SX

08-12-2012, 01:41 PM	#3
bitsnpieces Registered Users Thread Starter Join Date: Apr 2008 Location: Ct	Thats exactly what I did. Works great. Thanks! __________________ TDR, Bergen Intrepid FBL, Raptor Nitro G4 FBL Logo 600SX

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-12-2012, 12:56 PM	#2
KnifeEdgeUk Registered Users Join Date: Mar 2008	Hi mate, just undo the bolt holding the carb in place, and move the carb slighty. Should fit fine. I have a 105HZ-R in my G4. James