Warp 360 6s Battery choice:(sticky plz) - Page 9

Cullen Colapietro · 05-14-2013, 08:56 AM

I'm using 4 of the Punch Platinum 35C 1300 long packs. They weigh 265g and offer 4m of 3D on a 16t pinion w/ YGE governed as high as I can get it. Cells come down at 3.75V.

rallyant · 05-14-2013, 09:40 AM

Quote:

Originally Posted by Cullen Colapietro

I'm using 4 of the Punch Platinum 35C 1300 long packs. They weigh 265g and offer 4m of 3D on a 16t pinion w/ YGE governed as high as I can get it. Cells come down at 3.75V.

What HS does that end up at with 16t?

___________________________
Sent via Android, Tapatalk. 7HV,Warp, 130XXX

Cullen Colapietro · 05-14-2013, 01:10 PM

I haven't tached it... Sorry. I don't have the program card either, so it's not the highest governed HS one could expect out of a 16t. It could use just a bit more HS, but I like how it flies and I like 4m flight times better than 3.5m flight times.

Also, looks like cells are more like 3.78V.

rallyant · 05-14-2013, 05:54 PM

I only ask as Im considering trying a KDE 1750Kv with a 14t pinion

___________________________
Sent via Android, Tapatalk. 7HV,Warp, 130XXX

Vovets · 05-15-2013, 06:04 AM

[QUOTE=rallyant;4992272]I only ask as Im considering trying a KDE 1750Kv with a 14t pinion

Where are you going to get 14t pinion for 3.5mm shaft of this motor?

rallyant · 05-15-2013, 08:44 PM

Just Google 14t sM2 pulley.
Misumi sell14t bar stock. Can machine for whatever size motor shaft I want.

I might try and get a 13t. Smaller than recommend for the belts. But I have seem them around too.

___________________________
Sent via Android, Tapatalk. 7HV,Warp, 130XXX

05-14-2013, 08:56 AM	#161
Cullen Colapietro Registered Users Join Date: Oct 2008 Location: Reynoldsburg, OH	I'm using 4 of the Punch Platinum 35C 1300 long packs. They weigh 265g and offer 4m of 3D on a 16t pinion w/ YGE governed as high as I can get it. Cells come down at 3.75V. __________________ 6HV\|Warp 360\| Compass Models \| Prostar Hobby \| MKS \| EP Buddy \| Team KBDD

05-14-2013, 01:10 PM	#163
Cullen Colapietro Registered Users Join Date: Oct 2008 Location: Reynoldsburg, OH	I haven't tached it... Sorry. I don't have the program card either, so it's not the highest governed HS one could expect out of a 16t. It could use just a bit more HS, but I like how it flies and I like 4m flight times better than 3.5m flight times. Also, looks like cells are more like 3.78V. __________________ 6HV\|Warp 360\| Compass Models \| Prostar Hobby \| MKS \| EP Buddy \| Team KBDD

05-14-2013, 05:54 PM	#164
rallyant Registered Users Join Date: Mar 2012 Location: Australia, Melbourne, ringwood east	Re: Warp 360 6s Battery choice:(sticky plz) I only ask as Im considering trying a KDE 1750Kv with a 14t pinion ___________________________ Sent via Android, Tapatalk. 7HV,Warp, 130XXX

05-15-2013, 08:44 PM	#166
rallyant Registered Users Join Date: Mar 2012 Location: Australia, Melbourne, ringwood east	Re: Warp 360 6s Battery choice:(sticky plz) Just Google 14t sM2 pulley. Misumi sell14t bar stock. Can machine for whatever size motor shaft I want. I might try and get a 13t. Smaller than recommend for the belts. But I have seem them around too. ___________________________ Sent via Android, Tapatalk. 7HV,Warp, 130XXX

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-15-2013, 06:04 AM	#165
Vovets Registered Users Join Date: Mar 2011 Location: Moscow, Russian Federation	[QUOTE=rallyant;4992272]I only ask as Im considering trying a KDE 1750Kv with a 14t pinion Where are you going to get 14t pinion for 3.5mm shaft of this motor?