The ultimate cyclic servo for the T-rex 500?

ILoveMicroHelis · 11-27-2012, 03:49 PM

Hi all,

In short, what is the ultimate cyclic servo for the T-rex 500 equipped with V-bar FBL controller, regardless of price?

Thanks

Peter

ILoveMicroHelis · 11-29-2012, 02:02 PM

No one? Really?

T.i.a.

Peter

Luigi_tuga · 11-29-2012, 05:45 PM

I'm using mks 9660A+, they are nice and durable.
But seems gaui is launching some brushless HV mini servos.
Those could be the "ultimate".
Haven't seen their specs yet.

ddj74 · 11-29-2012, 07:56 PM

DS510m

ddj74 · 11-29-2012, 07:58 PM

Quote:

Originally Posted by Luigi_tuga

I'm using mks 9660A+, they are nice and durable.
But seems gaui is launching some brushless HV mini servos.
Those could be the "ultimate".
Haven't seen their specs yet.

They make HV mini's already

skered53 · 12-01-2012, 02:27 PM

My stock Align servos with Metal gears have survived probably 10 crashes, the only one I had to replace was the rear one and that was because the mounting tab sheared off upon impact. I've gone throught three tr servo's , currently running a Savox ( suposedly from same factory as Aligns ??) two were for stripped gears and one was because the leads got yanked out during tailboom shear off.

dannylightning · 12-01-2012, 02:41 PM

Quote:

Originally Posted by Luigi_tuga

I'm using mks 9660A+, they are nice and durable.
But seems gaui is launching some brushless HV mini servos.
Those could be the "ultimate".
Haven't seen their specs yet.

Those mks servos are the Best servos i ever flew on a 500. Beat the crap out of align and futaba servos

Sent from tapatalk. spelling will probably be worse than usual

Tiborfiú · 12-09-2012, 01:27 PM

i had many ds 510m..after some flights one and all had lot of freeplay but worked ok

Riff · 12-10-2012, 02:41 PM

Futaba S9650 with MKS9660 metal gears is a really nice combo.

I think ultimate would be probably Futaba BLS257

I use 3x Futaba S6650 with MKS metal gears + 1x Futaba BLS251

SpoocyMan · 12-11-2012, 01:15 AM

Hi, somebody knows anything about the
Align DS515M?
looks interesting :-)

Sent from my HTC One X using Tapatalk 2

szaki75 · 12-18-2012, 01:36 PM

Quote:

Originally Posted by SpoocyMan

Hi, somebody knows anything about the
Align DS515M?
looks interesting :-)

yes. ICE 100 internal BEC cannot drive them and need an external BEC or ESC with stronger BEC. (Talon 90)

http://www.youtube.com/watch?v=SiZwMSkhvMY

Blayd · 12-19-2012, 03:07 PM

The ICE 100 can fly them.. theres a guy here that flies them on the ICE 100 with no problem at 6v.

Molari · 12-22-2012, 06:25 AM

I installed 515m's last month on my Pro. They feel pretty fast. I'm using the Align ESC.

Edit: just watched the video above and never saw anyone using the throttle stick that way!

lol

Feeback · 12-22-2012, 10:00 AM

Quote:

Originally Posted by szaki75

yes. ICE 100 internal BEC cannot drive them and need an external BEC or ESC with stronger BEC.

What did you unplug that made it work OK?

Breezyjr · 12-24-2012, 01:04 PM

What about the JR HV mini servos??? JR3711HV, they seemed to work fine in mine... Although, I did end up stripping the gears of one of them after a crash...

Joe_Breezy

11-27-2012, 03:49 PM	#1
ILoveMicroHelis Registered Users Join Date: Dec 2008 Location: Scandinavia	The ultimate cyclic servo for the T-rex 500? Hi all, In short, what is the ultimate cyclic servo for the T-rex 500 equipped with V-bar FBL controller, regardless of price? Thanks Peter

11-29-2012, 05:45 PM	#3
Luigi_tuga Registered Users Join Date: Aug 2011 Location: Portugal	I'm using mks 9660A+, they are nice and durable. But seems gaui is launching some brushless HV mini servos. Those could be the "ultimate". Haven't seen their specs yet. __________________ Warp 360 , Tarot 480 T500Fbl AP MCPX bl PZ StrykerQ DX8

11-29-2012, 07:56 PM	#4
ddj74 Registered Users Join Date: Dec 2011 Location: Winter Haven, Florida 33880	DS510m __________________ ☆☆☆T-REX 700 DFC v3, AR7200BX, ICE2 160HV,DC-UP MARK II ☆☆☆MKS HBL950 & MKS HBL980, GRYPHON EXTREME REGULATOR ☆☆☆POWERED BY THUNDER POWER LIPO'S

12-01-2012, 02:27 PM	#6
skered53 Registered Users Join Date: Dec 2010 Location: Oregon	My stock Align servos with Metal gears have survived probably 10 crashes, the only one I had to replace was the rear one and that was because the mounting tab sheared off upon impact. I've gone throught three tr servo's , currently running a Savox ( suposedly from same factory as Aligns ??) two were for stripped gears and one was because the leads got yanked out during tailboom shear off. __________________ T-rex 500FBL BeastX, I2 MRH & Swash, I2 tailboom holder TT version,( Bob's the Mahn ! ) DX7s. Gaui 550 FB, T-rex 550 I2 FBL head. CH-53E's 83-87. MCAS New River. FAA certified Airframe & Powerplant license holder since 1992

12-10-2012, 02:41 PM	#9
Riff Registered Users My HF Map location Join Date: Oct 2010 Location: Estonia	Futaba S9650 with MKS9660 metal gears is a really nice combo. I think ultimate would be probably Futaba BLS257 I use 3x Futaba S6650 with MKS metal gears + 1x Futaba BLS251 __________________ T-Rex 450 Pro 6s, GY401; T-Rex 500CF SK-720; DX7se To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. www.facebook.com/kopteriklubi

11-29-2012, 02:02 PM	#2
ILoveMicroHelis Registered Users Thread Starter Join Date: Dec 2008 Location: Scandinavia	No one? Really? T.i.a. Peter

12-09-2012, 01:27 PM	#8
Tiborfiú Registered Users Join Date: Feb 2011 Location: Europe	i had many ds 510m..after some flights one and all had lot of freeplay but worked ok

12-11-2012, 01:15 AM	#10
SpoocyMan Registered Users Join Date: Aug 2012 Location: Norway, Rogaland	Hi, somebody knows anything about the Align DS515M? looks interesting :-) Sent from my HTC One X using Tapatalk 2

12-19-2012, 03:07 PM	#12
Blayd Registered Users My HF Map location Join Date: Jan 2011 Location: Over The Hills and Far Away	The ICE 100 can fly them.. theres a guy here that flies them on the ICE 100 with no problem at 6v. __________________ Trex700N2E Trex500ESPTT(PRO head and Tail ) *Trex500ESP (Belted)* *HC500SE All flying Spartan, CC100A, CC20APro, Hitec 5245MG, Futaba 9257, Walkera Devo 8S, KBDD, i2!*

12-22-2012, 06:25 AM	#13
Molari Registered Users Join Date: Nov 2011 Location: Amsterdam, The Netherlands	I installed 515m's last month on my Pro. They feel pretty fast. I'm using the Align ESC. Edit: just watched the video above and never saw anyone using the throttle stick that way! lol __________________ Edward T-Rex 500 ESP, T-Rex 500E PRO, CopterX 250, Blade Nano CPX, SPEkTRUM DX8

12-24-2012, 01:04 PM	#15
Breezyjr Registered Users My HF Map location Join Date: Apr 2009 Location: Commerce Twp, MI	What about the JR HV mini servos??? JR3711HV, they seemed to work fine in mine... Although, I did end up stripping the gears of one of them after a crash... Joe_Breezy __________________ Diablo, Shape 9.0, Goblin 700, Sylphide 90, Srimok 90N, Srimok 90E, Dune, Vibe 90SG FB & FBL, TDR, 700E F3C, E-Aurora, Raptor 90SE, Logo 600SE, T600 ESP, T600NSP, Synergy E6, N5, Logo 500SE, Vibe 50, Warp 360, Gaui NX4 & X4,T500, T450 Pro FBL, 130x

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode