Trex 500 Build Videos - Page 8

th3tick · 12-16-2007, 07:09 PM

So, will an AR9000/JR R921 fit between the frames? Will it work on the little shelf with clearance for the side wiring to the satellites?

John

EDIT: Sorry, don't have mine yet, and got an irrational fear...

Finless · 12-16-2007, 09:11 PM

Yes of course it will fit! Sheesh it fits between a 450 frame......

However in my vids it's going on top of the tail box because the servo wires are too short to reach to the bottom or even the tray...

Bob

psindrup · 12-17-2007, 03:16 AM

Quote:

Originally Posted by Finless

However in my vids it's going on top of the tail box because the servo wires are too short to reach to the bottom or even the tray...
Bob

I noticed how short the servo wires were in your servo video, and thought hmnn ... that is going to be interesting how Bob is going to fix that. :wink:

Is there anyone out there that happens to know if the wires a just as short on the other servo alternatives?

T.i.a.

Peter

bullaculla · 12-17-2007, 04:00 AM

Hey Bob, All those arms DO come with the 5245 servos including the trick aluminum one, thats why I posted it

Also, the wires are at least 7 inches long. I dont remember if I trimmed mine or not.

:edit:
RH website states the wire is 12 inches

carlos · 12-17-2007, 06:13 AM

nice work with the videos Bob.
Keep em comin.

ties · 12-17-2007, 10:20 AM

What do you think about these servos? anyone using them? experience?

JR Z3650

Type: Digital
Torque:42 oz/in @ 4.8V, 51 oz/in @ 6V
Speed:.11 sec/60° @ 4.8V, .09 sec/60° @ 6V
Dimensions (WxLxH):.58" x 1.30" x 1.02"
Weight:1.04 oz.
Bearing:Single ball bearing
Motor Type:Coreless Motor
Gears:Metal Gears

Strong enough? Fast enough?

hookmaker · 12-17-2007, 03:22 PM

Bob! Thanks for clearing up yet another matter, - I basically agreed with you about "that trim BS", but you took it even further and took away the myth of sub-trim as I have been taught. I did actually believe that there would be a shift in ATV and servo center, but I am glad to hear that my 14MZ and many other transmitters don't even care.

Thanks for the lesson. Respect......again!

/Henrik

Hangarace · 12-17-2007, 05:19 PM

In reference to..5245 servos and arms including the trick aluminum one Cool! FYI...The metal one is the only one that supports 16.5mm. I belive that is the measurement that Bob talks about in his video.
Dave:thumbs-up2:

jack726 · 12-17-2007, 05:53 PM

Hay Bob
Sorry I meant to send it in a PM

Jack

bugdozer · 12-17-2007, 06:48 PM

Quote:

Originally Posted by Hangarace

In reference to..5245 servos and arms including the trick aluminum one Cool! FYI...The metal one is the only one that supports 16.5mm. I belive that is the measurement that Bob talks about in his video.
Dave:thumbs-up2:

Have one in my hand right now. 16mm center-to-center third hole out. Sweet!

razer t-rex · 12-17-2007, 07:00 PM

bob which heli of all the heli's that you have built and flown, which one do you think would be the best for someone who is new to this hobby?

Pinecone · 12-17-2007, 07:10 PM

The DuBro Heavy Duty Servo Arms (not the Long ones) for Hitec fit the 5245s and the shart arm is 16.5mm to the second hole out from center, and the mid length arms are 16.5mm to the second hole out from center.

I just checked some.

Finless · 12-17-2007, 07:29 PM

Quote:

Originally Posted by jack726

Hay Bob
Sorry I meant to send it in a PM

Jack

What? I didnt get a PM?

Bob

spencer737 · 12-17-2007, 08:06 PM

Bob, where are you getting your HS5245MG's???

Finless · 12-17-2007, 08:08 PM

I got them from RCHover.com

Bob

spencer737 · 12-17-2007, 08:14 PM

huh, they don't stock them?

Finless · 12-17-2007, 08:16 PM

Well thats where I got them however i did call up Jeremy rather than do it online.

My box arrived today with a return address of RCHover

Bob

spencer737 · 12-17-2007, 08:17 PM

uh, hurry up with the install of them, LOL

Finless · 12-17-2007, 08:19 PM

Yep... First thing I will shoot next! 9650's are coming out now.

But so you know I have to go on a short trip tomorrow so the vids wont be up until early Wednesday!

Bob

spencer737 · 12-17-2007, 08:20 PM

tisk tisk, well that will just give us something to look forward too!!!!!!!!!!

12-16-2007, 07:09 PM	#141
th3tick Registered Users Join Date: Mar 2007 Location: Colorado	So, will an AR9000/JR R921 fit between the frames? Will it work on the little shelf with clearance for the side wiring to the satellites? John EDIT: Sorry, don't have mine yet, and got an irrational fear... __________________ Logo 600 3D V-Bar, Jazz 55-10-32, Tango 45-7, 0.7/13T, BLS451/BLS251, JR R921, Maniac623 Logo 500 3D V-Bar, Jive 100+LV, Scorpion HK-4020-1100, 0.7/15T, S9452/S9256, AR7000, RT560 T-Rex 600 CF, Jazz 80-6-18, Neu 1515/2.5D/F/H, 11T, S9451, ds760/S9254, AR7000, Radix600 T-Rex 500 CF, stock ESC/motor/rotors, 13T, HS-5245MG, ds760/S9254, JR R921 Last edited by th3tick; 12-16-2007 at 09:22 PM..

12-16-2007, 09:11 PM	#142
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005 Location: Stanton, Ca. USA	Yes of course it will fit! Sheesh it fits between a 450 frame...... However in my vids it's going on top of the tail box because the servo wires are too short to reach to the bottom or even the tray... Bob __________________ "Don't Taco My Pack Dude!" To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.*

12-17-2007, 04:00 AM	#144
bullaculla Registered Users Join Date: Nov 2006 Location: Honolulu, Hawaii	Hey Bob, All those arms DO come with the 5245 servos including the trick aluminum one, thats why I posted it Also, the wires are at least 7 inches long. I dont remember if I trimmed mine or not. :edit: RH website states the wire is 12 inches __________________ T-Rex 600 HFE-stretched to 700, 10s, Tango 45-08, Jazz 55, JR7703D/S8900G, DJ Vegh nose cam mount. T-Rex 600 HFX-stretched to 700, 10s, Orbit 30-12, Jazz 55, GY611/S9256, Askman 360 mount. JR X9303.

12-17-2007, 06:13 AM	#145
carlos Registered Users Join Date: Jul 2004 Location: I come from a land down under !	nice work with the videos Bob. Keep em comin. __________________ If it won't hover, Don't bother !

12-17-2007, 10:20 AM	#146
ties Registered Users My HF Map location Join Date: Jan 2007 Location: Germany, Munich	What do you think about these servos? anyone using them? experience? JR Z3650 Type: Digital Torque:42 oz/in @ 4.8V, 51 oz/in @ 6V Speed:.11 sec/60° @ 4.8V, .09 sec/60° @ 6V Dimensions (WxLxH):.58" x 1.30" x 1.02" Weight:1.04 oz. Bearing:Single ball bearing Motor Type:Coreless Motor Gears:Metal Gears Strong enough? Fast enough? Last edited by ties; 12-17-2007 at 02:35 PM..

12-17-2007, 03:22 PM	#147
hookmaker Registered Users My HF Map location Join Date: Jun 2006 Location: Copenhagen, Denmark	Bob! Thanks for clearing up yet another matter, - I basically agreed with you about "that trim BS", but you took it even further and took away the myth of sub-trim as I have been taught. I did actually believe that there would be a shift in ATV and servo center, but I am glad to hear that my 14MZ and many other transmitters don't even care. Thanks for the lesson. Respect......again! /Henrik __________________ Hookmaker Kasama Srimok 90, Kasama Srimok 90E, JR Vibe 90 SG, JR Venture 90, JR Vibe 50 3D V-bar, Bergen Intrepid Gasser, Vision-SX 90 (x 2) MSH Protos "Monsterheli", HDX-450

12-17-2007, 05:19 PM	#148
Hangarace Registered Users My HF Map location Join Date: Oct 2005 Location: Southern Oregon Coast...and loving it	In reference to..5245 servos and arms including the trick aluminum one Cool! FYI...The metal one is the only one that supports 16.5mm. I belive that is the measurement that Bob talks about in his video. Dave:thumbs-up2: __________________ MA Whiplash-BeastX Fusion 50 3G FBL Trex 700E 3G FBL Trex 600E 3G FBL (#1) MD500E fun scale Trex 600E 3G Trex 450 SE V2 Trex 450 SE (Night Flyer) *AMA# 50163* To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

12-17-2007, 05:53 PM	#149
jack726 Registered Users Join Date: May 2006 Location: Cerritos California	Hay Bob Sorry I meant to send it in a PM Jack

12-17-2007, 07:00 PM	#151
razer t-rex Registered Users Join Date: Nov 2007 Location: Rootstown Ohio	bob which heli of all the heli's that you have built and flown, which one do you think would be the best for someone who is new to this hobby?

12-17-2007, 07:10 PM	#152
Pinecone Registered Users Join Date: Sep 2006 Location: Maryland	The DuBro Heavy Duty Servo Arms (not the Long ones) for Hitec fit the 5245s and the shart arm is 16.5mm to the second hole out from center, and the mid length arms are 16.5mm to the second hole out from center. I just checked some. __________________ Terry AMA#47402, IRCHA # 3395 Blade CP "Pro", Trex 450SE, PiccoZ, Quick of Japan EP8v2 EX, Hurricane 550, Hurricane 200, JR Vibe 50, Blade mCX, Bergen Intrepid Gasser, Pantera 50, Blade mSR, Novus CP

12-17-2007, 08:06 PM	#154
spencer737 Registered Users Join Date: Mar 2007 Location: Calgary AB Canada	Bob, where are you getting your HS5245MG's???

12-17-2007, 08:08 PM	#155
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005 Location: Stanton, Ca. USA	I got them from RCHover.com Bob __________________ "Don't Taco My Pack Dude!" To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.*

12-17-2007, 08:14 PM	#156
spencer737 Registered Users Join Date: Mar 2007 Location: Calgary AB Canada	huh, they don't stock them?

12-17-2007, 08:16 PM	#157
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005 Location: Stanton, Ca. USA	Well thats where I got them however i did call up Jeremy rather than do it online. My box arrived today with a return address of RCHover Bob __________________ "Don't Taco My Pack Dude!" To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.*

12-17-2007, 08:17 PM	#158
spencer737 Registered Users Join Date: Mar 2007 Location: Calgary AB Canada	uh, hurry up with the install of them, LOL

12-17-2007, 08:19 PM	#159
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005 Location: Stanton, Ca. USA	Yep... First thing I will shoot next! 9650's are coming out now. But so you know I have to go on a short trip tomorrow so the vids wont be up until early Wednesday! Bob __________________ "Don't Taco My Pack Dude!" To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.*

12-17-2007, 08:20 PM	#160
spencer737 Registered Users Join Date: Mar 2007 Location: Calgary AB Canada	tisk tisk, well that will just give us something to look forward too!!!!!!!!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode